Brand Tripp Lite

Eaton Tripp Lite Series MTP/MPO (APC) Singlemode Slim Trunk Cable, 24-Strand, 40/100 GbE, 40/100GBASE-PLR4, Plenum, 6mm Dual Jacket, 61 m (200 ft.)

Fiber Optic for Network Device - 12.50 GB/s - Patch Cable - 200.13 ft - 3 x MTP/MPO Female Network - 3 x MTP/MPO Female Network - 8.3/125 µm - Yellow

★ 4.8

SKU: EL2840

VPN #: N392-61M-3X8-AP

In Stock (6)

Price

$ 1,210.07 MSRP $ 2,117.35

Excl. tax

♡ ↗

↩

Returnable Product Check product return policy

✓

Warranty Included Manufacturer warranty available

✓

Authorized to Purchase This product is authorized for purchase

🚚

Committed to Better Shopping

Delivering value with every purchase.

☎

Support Every Day

Support from 8:30 AM to 10:00 PM everyday.

↻

Easy Returns

Flexible return and replacement options where applicable.

Tripp Lite series N392-61M-3X8-AP Fiber Optic Patch Network Cable - 200.1 ft (60.99 m) Fiber Optic Network Cable for Network Device - First End: 3 x MTP/MPO Network - Female - Second End: 3 x MTP/MPO Network - Female - 100 Gbit/s - Patch Cable - Single-mode - 8.3/125 µm - Yellow

Summary	Tripp Lite series N392-61M-3X8-AP Fiber Optic Patch Network Cable - 200.1 ft (60.99 m) Fiber Optic Network Cable for Network Device - First End: 3 x MTP/MPO Network - Female - Second End: 3 x MTP/MPO Network - Female - 100 Gbit/s - Patch Cable - Single-mode - 8.3/125 µm - Yellow
Stock	In Stock (6)
Seller
Brand	Tripp Lite
Quality label
SKU	EL2840
VPN #	N392-61M-3X8-AP
UPC	0037332205490

Tech Specs

Manufacturer

Eaton Corporation

Manufacturer Part Number

N392-61M-3X8-AP

Manufacturer Website Address

http://www.eaton.com

Brand Name

Tripp Lite series

Product Model

N392-61M-3X8-AP

Product Name

N392-61M-3X8-AP Fiber Optic Patch Network Cable

Marketing Information

The N392-61M-3X8-AP MTP/MPO (APC) Singlemode Slim Trunk Cable (3xF/3xF) supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers. With three female MTP/MPO connectors on each end, this singlemode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames).

The factory-terminated 8-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up rack space for other cables. The APC connectors are angled to prevent infrared light entering the fiber from bouncing back into the laser. Optimized for QSFP+ 40GBASE-PLR4 and QSFP28 100GBASE-PSM4 networks, this cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.

The N392-61M-3X8-AP is colored yellow for instant identification in a crowded switch or patch panel as a singlemode cable. Push/pull tab connectors are easily accessible in high-density data center applications and make the plug-and-play cable easy to install and remove with one hand. The 6-millimeter dual plenum-rated jacket and bend-insensitive fiber are perfect for connecting high-speed network components in ceilings, walls and ducts.

Features

8.3/125 Rated Singlemode Cable for 40/100 Gb Ethernet Applications

Designed to extend high-density connections between network equipment in telecom rooms and data centers
Recommended for patching between data center MDFs and IDFs
Optimized for QSFP+ 40GBASE-PLR4 and QSFP28 100GBASE-PSM4 networks
6 mm dual plenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts
Yellow-colored for identification as a singlemode cable

Factory-Terminated MTP/MPO APC Connectors with Push/Pull Tabs